ci/maas/intel/pod6/deployment.yaml

   1 # This file defines the deployment for the MAAS environment which is to be
   2 # deployed and automated.
   3 demo-maas:
   4     maas:
   5         # Defines the general setup for the MAAS environment, including the
   6         # username and password for the host as well as the MAAS server.
   7         user: ubuntu
   8         password: ubuntu
   9
  10         # Contains the virtual machine parameters for creating the MAAS virtual
  11         # server. Here you can configure the name of the virsh domain, the
  12         # parameters for how the network is attached.
  13         name: opnfv-maas-intel
  14         interfaces: ['bridge=brAdm,model=virtio', 'bridge=brData,model=virtio', 'bridge=brPublic,model=virtio']
  15         memory: 4096
  16         vcpus: 4
  17         arch: amd64
  18         pool: default
  19         disk_size: 160G
  20
  21         # Apt http proxy setting(s)
  22         apt_http_proxy:
  23
  24         apt_sources:
  25           - ppa:maas/next
  26           - ppa:juju/stable
  27
  28         # Virsh power settings
  29         # Specifies the uri and keys to use for virsh power control of the
  30         # juju virtual machine. If the uri is omitted, the value for the
  31         # --remote is used. If no power settings are desired, then do not
  32         # supply the virsh block.
  33         virsh:
  34             rsa_priv_key: /home/ubuntu/.ssh/id_rsa
  35             rsa_pub_key: /home/ubuntu/.ssh/id_rsa.pub
  36             uri: qemu+ssh://ubuntu@10.4.1.1/system
  37
  38         # Defines the IP Address that the configuration script will use to
  39         # to access the MAAS controller via SSH.
  40         ip_address: 10.4.1.2
  41
  42         # This section allows the user to set a series of options on the
  43         # MAAS server itself. The list of config options can be found in
  44         # the upstream MAAS documentation:
  45         #  - http://maas.ubuntu.com/docs/api.html#maas-server
  46         settings:
  47             main_archive: http://us.archive.ubuntu.com/ubuntu
  48             upstream_dns: 10.4.0.2
  49             maas_name: intelpod6
  50             # kernel_opts: "console=tty0 console=ttyS1,115200n8"
  51             # ntp_server: ntp.ubuntu.com
  52
  53         # This section is used to define the networking parameters for when
  54         # the node first comes up. It is fed into the meta-data cloud-init
  55         # configuration and is used to configure the networking piece of the
  56         # service. The contents of this section are written directly to the
  57         # /etc/network/interfaces file.
  58         #
  59         # Please note, this is slightly different than the
  60         # node-group-interfaces section below. This will configure the
  61         # machine's networking params, and the node-group-interfaces will
  62         # configure the maas node-group interfaces which is used for
  63         # controlling the dhcp, dns, etc.
  64         network_config: |
  65             auto lo
  66             iface lo inet loopback
  67
  68             auto eth0
  69             iface eth0 inet static
  70             address 10.4.1.2
  71             netmask 255.255.248.0
  72             network 10.4.0.0
  73             broadcast 10.4.7.255
  74             gateway 10.4.0.1
  75             dns-nameservers 10.4.0.2 127.0.0.1
  76
  77             auto eth1
  78             iface eth1 inet static
  79             address 10.4.9.2
  80             netmask 255.255.248.0
  81
  82             auto eth2
  83             iface eth2 inet static
  84             address 10.2.66.3
  85             netmask 255.255.255.0
  86
  87             #auto lo
  88             #iface lo inet loopback
  89
  90             #auto eth0
  91             #iface eth0 inet static
  92             #  address 192.168.122.2
  93             #  netmask 255.255.248.0
  94             #  network 192.168.122.0
  95             #  broadcast 192.168.122.255
  96             #  gateway 192.168.122.1
  97             #  dns-nameservers 192.168.122.1 127.0.0.1
  98
  99         # The node-group-interfaces section is used to configure the MAAS
 100         # network interfaces. Basic configuration is supported, such as which
 101         # device should be bound, the range of IP addresses, etc.
 102         # Note: this may contain the special identifiers:
 103         #   ${maas_net} - the first 3 octets of the ipv4 address
 104         #   ${maas_ip} - the ip address of the MAAS controller
 105         node_group_ifaces:
 106             - device: eth0
 107               ip: 10.4.1.2
 108               subnet_mask: 255.255.248.0
 109               broadcast_ip: 10.4.7.255
 110               router_ip: 10.4.0.1
 111               static_range:
 112                   low: 10.4.2.20
 113                   high: 10.4.2.254
 114               dynamic_range:
 115                   low: 10.4.1.50
 116                   high: 10.4.1.254
 117             - device: eth1
 118               ip: 10.4.9.2
 119               subnet_mask: 255.255.255.0
 120               broadcast_ip: 10.4.9.255
 121               management: 1
 122               static_range:
 123                   low: 10.4.9.20
 124                   high: 10.4.9.150
 125               dynamic_range:
 126                   low: 10.4.9.151
 127                   high: 10.4.9.200
 128             - device: eth2
 129               ip: 10.2.66.3
 130               subnet_mask: 255.255.255.0
 131               broadcast_ip: 10.2.66.255
 132               management: 1
 133               static_range:
 134                   low: 10.2.66.20
 135                   high: 10.2.66.150
 136               dynamic_range:
 137                   low: 10.2.66.151
 138                   high: 10.2.66.200
 139
 140         # Defines the physical nodes which are added to the MAAS cluster
 141         # controller upon startup of the node.
 142         nodes:
 143             - name: node1-control
 144               tags: control
 145               architecture: amd64/generic
 146               mac_addresses:
 147                   - "00:1e:67:d8:ba:45"
 148               power:
 149                   type: ipmi
 150                   address: 10.4.7.1
 151                   user: root
 152                   pass: root
 153                   driver: LAN_2_0
 154 #              sticky_ip_address:
 155 #                  mac_address: "38:63:bb:43:b8:9c"
 156 #                  requested_address: 192.168.122.5
 157
 158             - name: node2-control
 159               tags: control
 160               architecture: amd64/generic
 161               mac_addresses:
 162                   - "00:1e:67:e0:0b:71"
 163               power:
 164                   type: ipmi
 165                   address: 10.4.7.2
 166                   user: root
 167                   pass: root
 168                   driver: LAN_2_0
 169 #              sticky_ip_address:
 170 #                  mac_address: "38:63:bb:43:b8:9c"
 171 #                  requested_address: 192.168.122.5
 172
 173             - name: node3-control
 174               tags: control
 175               architecture: amd64/generic
 176               mac_addresses:
 177                   - "00:1e:67:e0:09:32"
 178               power:
 179                   type: ipmi
 180                   address: 10.4.7.3
 181                   user: root
 182                   pass: root
 183                   driver: LAN_2_0
 184 #              sticky_ip_address:
 185 #                  mac_address: "38:63:bb:43:b8:9c"
 186 #                  requested_address: 192.168.122.5
 187
 188             - name: node4-compute
 189               tags: compute
 190               architecture: amd64/generic
 191               mac_addresses:
 192                   - "00:1e:67:e0:09:fa"
 193               power:
 194                   type: ipmi
 195                   address: 10.4.7.4
 196                   user: root
 197                   pass: root
 198                   driver: LAN_2_0
 199 #              sticky_ip_address:
 200 #                  mac_address: "38:63:bb:43:b8:9c"
 201 #                  requested_address: 192.168.122.5
 202
 203             - name: node5-compute
 204               tags: compute
 205               architecture: amd64/generic
 206               mac_addresses:
 207                   - "00:1e:67:cf:bc:f7"
 208               power:
 209                   type: ipmi
 210                   address: 10.4.7.5
 211                   user: root
 212                   pass: root
 213                   driver: LAN_2_0
 214 #              sticky_ip_address:
 215 #                  mac_address: "38:63:bb:43:b8:9c"
 216 #                  requested_address: 192.168.122.5
 217
 218 #            - name: jenkins-slave
 219 #              tags: jenkins-slave
 220 #              architecture: amd64/generic
 221 #              mac_addresses:
 222 #                  - "52:54:00:f0:5c:53"
 223 #              power:
 224 #                  type: virsh
 225 #                  address: qemu+ssh://ubuntu@10.4.1.1/system
 226
 227     # Contains the virtual machine parameters for creating the Juju bootstrap
 228     # node virtual machine
 229     juju-bootstrap:
 230         name: bootstrap
 231         interfaces: ['bridge=brAdm,model=virtio', 'bridge=brPublic,model=virtio']
 232         memory: 4096
 233         vcpus: 4
 234         arch: amd64
 235         pool: default
 236         disk_size: 120G