1 # This file defines the deployment for the MAAS environment which is to be
2 # deployed and automated.
5 # Defines the general setup for the MAAS environment, including the
6 # username and password for the host as well as the MAAS server.
10 # Contains the virtual machine parameters for creating the MAAS virtual
11 # server. Here you can configure the name of the virsh domain, the
12 # parameters for how the network is attached.
13 name: opnfv-maas-intel
14 interfaces: ['bridge=brAdm,model=virtio', 'bridge=brData,model=virtio', 'bridge=brPublic,model=virtio', 'bridge=brExt,model=virtio']
21 # Apt http proxy setting(s)
28 # Virsh power settings
29 # Specifies the uri and keys to use for virsh power control of the
30 # juju virtual machine. If the uri is omitted, the value for the
31 # --remote is used. If no power settings are desired, then do not
32 # supply the virsh block.
34 rsa_priv_key: /home/ubuntu/.ssh/id_rsa
35 rsa_pub_key: /home/ubuntu/.ssh/id_rsa.pub
36 uri: qemu+ssh://jenkins@10.5.1.1/system
38 # Defines the IP Address that the configuration script will use to
39 # to access the MAAS controller via SSH.
42 # This section allows the user to set a series of options on the
43 # MAAS server itself. The list of config options can be found in
44 # the upstream MAAS documentation:
45 # - http://maas.ubuntu.com/docs/api.html#maas-server
47 main_archive: http://us.archive.ubuntu.com/ubuntu
50 # kernel_opts: "console=tty0 console=ttyS1,115200n8"
51 # ntp_server: ntp.ubuntu.com
53 # This section is used to define the networking parameters for when
54 # the node first comes up. It is fed into the meta-data cloud-init
55 # configuration and is used to configure the networking piece of the
56 # service. The contents of this section are written directly to the
57 # /etc/network/interfaces file.
59 # Please note, this is slightly different than the
60 # node-group-interfaces section below. This will configure the
61 # machine's networking params, and the node-group-interfaces will
62 # configure the maas node-group interfaces which is used for
63 # controlling the dhcp, dns, etc.
66 iface lo inet loopback
69 iface eth0 inet static
75 dns-nameservers 8.8.8.8 10.5.1.2 127.0.0.1
78 iface eth1 inet static
83 iface eth2 inet static
88 iface eth3 inet static
92 #iface lo inet loopback
95 #iface eth0 inet static
96 # address 192.168.122.2
97 # netmask 255.255.248.0
98 # network 192.168.122.0
99 # broadcast 192.168.122.255
100 # gateway 192.168.122.1
101 # dns-nameservers 192.168.122.1 127.0.0.1
103 # The node-group-interfaces section is used to configure the MAAS
104 # network interfaces. Basic configuration is supported, such as which
105 # device should be bound, the range of IP addresses, etc.
106 # Note: this may contain the special identifiers:
107 # ${maas_net} - the first 3 octets of the ipv4 address
108 # ${maas_ip} - the ip address of the MAAS controller
112 subnet_mask: 255.255.255.0
113 broadcast_ip: 10.5.1.255
123 subnet_mask: 255.255.255.0
124 broadcast_ip: 10.5.12.255
134 subnet_mask: 255.255.255.0
135 broadcast_ip: 10.5.15.255
144 # Defines the physical nodes which are added to the MAAS cluster
145 # controller upon startup of the node.
147 - name: node1-control
149 architecture: amd64/generic
151 - "00:1e:67:cf:bb:54"
159 # mac_address: "38:63:bb:43:b8:9c"
160 # requested_address: 192.168.122.5
162 - name: node2-control
164 architecture: amd64/generic
166 - "00:1e:67:cf:b8:93"
174 - name: node3-control
176 architecture: amd64/generic
178 - "00:1e:67:e0:08:7f"
186 # mac_address: "38:63:bb:43:b8:9c"
187 # requested_address: 192.168.122.5
189 - name: node4-compute
191 architecture: amd64/generic
193 - "00:1e:67:e0:08:b1"
201 # mac_address: "38:63:bb:43:b8:9c"
202 # requested_address: 192.168.122.5
204 - name: node5-compute
206 architecture: amd64/generic
208 - "00:1e:67:e0:0a:4b"
216 # mac_address: "38:63:bb:43:b8:9c"
217 # requested_address: 192.168.122.5
219 # - name: jenkins-slave
220 # tags: jenkins-slave
221 # architecture: amd64/generic
223 # - "52:54:00:f0:5c:53"
226 # address: qemu+ssh://ubuntu@10.4.1.1/system
228 # Contains the virtual machine parameters for creating the Juju bootstrap
229 # node virtual machine
232 interfaces: ['bridge=brAdm,model=virtio', 'bridge=brPublic,model=virtio', 'bridge=brExt,model=virtio']