1 # This file defines the deployment for the MAAS environment which is to be
2 # deployed and automated.
5 # Defines the general setup for the MAAS environment, including the
6 # username and password for the host as well as the MAAS server.
10 # Contains the virtual machine parameters for creating the MAAS virtual
11 # server. Here you can configure the name of the virsh domain, the
12 # parameters for how the network is attached.
14 interfaces: ['bridge=brAdm,model=virtio']
21 # Apt http proxy setting(s)
28 # Virsh power settings
29 # Specifies the uri and keys to use for virsh power control of the
30 # juju virtual machine. If the uri is omitted, the value for the
31 # --remote is used. If no power settings are desired, then do not
32 # supply the virsh block.
34 rsa_priv_key: /home/ubuntu/.ssh/id_rsa
35 rsa_pub_key: /home/ubuntu/.ssh/id_rsa.pub
36 uri: qemu+ssh://ubuntu@192.168.10.2/system
38 # Defines the IP Address that the configuration script will use to
39 # to access the MAAS controller via SSH.
40 ip_address: 192.168.10.3
42 # This section allows the user to set a series of options on the
43 # MAAS server itself. The list of config options can be found in
44 # the upstream MAAS documentation:
45 # - http://maas.ubuntu.com/docs/api.html#maas-server
47 main_archive: http://us.archive.ubuntu.com/ubuntu
50 # kernel_opts: "console=tty0 console=ttyS1,115200n8"
51 # ntp_server: ntp.ubuntu.com
53 # This section is used to define the networking parameters for when
54 # the node first comes up. It is fed into the meta-data cloud-init
55 # configuration and is used to configure the networking piece of the
56 # service. The contents of this section are written directly to the
57 # /etc/network/interfaces file.
59 # Please note, this is slightly different than the
60 # node-group-interfaces section below. This will configure the
61 # machine's networking params, and the node-group-interfaces will
62 # configure the maas node-group interfaces which is used for
63 # controlling the dhcp, dns, etc.
66 iface lo inet loopback
69 iface eth0 inet static
73 broadcast 192.168.10.255
75 dns-nameservers 8.8.8.8 127.0.0.1
77 # The node-group-interfaces section is used to configure the MAAS
78 # network interfaces. Basic configuration is supported, such as which
79 # device should be bound, the range of IP addresses, etc.
80 # Note: this may contain the special identifiers:
81 # ${maas_net} - the first 3 octets of the ipv4 address
82 # ${maas_ip} - the ip address of the MAAS controller
86 subnet_mask: 255.255.255.0
87 broadcast_ip: 192.168.10.255
88 router_ip: 192.168.10.1
96 # Defines the physical nodes which are added to the MAAS cluster
97 # controller upon startup of the node.
101 architecture: amd64/generic
103 - "<controller1-mac>"
106 mac_address: <controller1-mac>
110 architecture: amd64/generic
115 mac_address: <compute1-mac>
117 # Contains the virtual machine parameters for creating the Juju bootstrap
118 # node virtual machine
121 interfaces: ['bridge=brAdm,model=virtio']