3 # Some can be overriden on rpmbuild commandline with:
4 # rpmbuild --define 'variable value'
5 # (use any value, ie 1 for flag "with_XXXX" definitions)
7 # E.g. rpmbuild --define 'release_rev 02' may be useful if building
8 # rpms again and again on the same day, so the newer rpms can be installed.
9 # bumping the number each time.
11 ####################### Quagga configure options #########################
12 # with-feature options
13 %{!?with_snmp: %global with_snmp 1 }
14 %{!?with_vtysh: %global with_vtysh 1 }
15 %{!?with_tcp_zebra: %global with_tcp_zebra 0 }
16 %{!?with_vtysh: %global with_vtysh 1 }
17 %{!?with_pam: %global with_pam 1 }
18 %{!?with_ospfclient: %global with_ospfclient 1 }
19 %{!?with_ospfapi: %global with_ospfapi 1 }
20 %{!?with_irdp: %global with_irdp 1 }
21 %{!?with_rtadv: %global with_rtadv 1 }
22 %{!?with_isisd: %global with_isisd 1 }
23 %{!?with_pimd: %global with_pimd 1 }
24 %{!?with_shared: %global with_shared 1 }
25 %{!?with_multipath: %global with_multipath 64 }
26 %{!?quagga_user: %global quagga_user quagga }
27 %{!?vty_group: %global vty_group quaggavt }
28 %{!?with_fpm: %global with_fpm 0 }
29 %{!?with_watchquagga: %global with_watchquagga 1 }
32 %define _sysconfdir /etc/quagga
33 %define zeb_src %{_builddir}/%{name}-%{quaggaversion}
34 %define zeb_rh_src %{zeb_src}/redhat
35 %define zeb_docs %{zeb_src}/doc
37 # defines for configure
38 %define _localstatedir /var/run/quagga
39 ############################################################################
41 #### Version String tweak
42 # Remove invalid characters form version string and replace with _
43 %{expand: %%define rpmversion %(echo '1.1.0-dev' | tr [:blank:]- _ )}
44 %define quaggaversion 1.1.0-dev
46 #### Check version of texi2html
47 # Old versions don't support "--number-footnotes" option.
48 %{expand: %%global texi2htmlversion %(rpm -q --qf '%%{VERSION}' texi2html | cut -d. -f1 )}
50 #### Check for systemd or init.d (upstart)
51 # Check for init.d (upstart) as used in CentOS 6 or systemd (ie CentOS 7)
52 %{expand: %%global initsystem %(if [[ `/sbin/init --version 2> /dev/null` =~ upstart ]]; then echo upstart; elif [[ `systemctl` =~ -\.mount ]]; then echo systemd; fi)}
54 # If init system is systemd, then always disable watchquagga
56 %if "%{initsystem}" == "systemd"
57 # Note: For systems with systemd, watchquagga will NOT be built. Systemd
58 # takes over the role of restarting crashed processes. Value will
59 # be overwritten with 0 below for systemd independent on the setting here
60 %global with_watchquagga 0
63 # if FPM is enabled, then enable tcp_zebra as well
66 %global with_tcp_zebra 1
69 # misc internal defines
70 %{!?quagga_uid: %define quagga_uid 92 }
71 %{!?quagga_gid: %define quagga_gid 92 }
72 %{!?vty_gid: %define vty_gid 85 }
74 %define daemon_list zebra ripd ospfd bgpd
76 %define daemonv6_list ripngd ospf6d
79 %define daemon_isisd isisd
81 %define daemon_isisd ""
85 %define daemon_pimd pimd
87 %define daemon_pimd ""
90 %if %{with_watchquagga}
91 %define daemon_watchquagga watchquagga
93 %define daemon_watchquagga ""
96 %define all_daemons %{daemon_list} %{daemonv6_list} %{daemon_isisd} %{daemon_pimd} %{daemon_watchquagga}
98 # allow build dir to be kept
99 %{!?keep_build: %global keep_build 0 }
101 #release sub-revision (the two digits after the CONFDATE)
102 %{!?release_rev: %define release_rev 01 }
104 Summary: Routing daemon
106 Version: %{rpmversion}
107 Release: 20170120%{release_rev}%{?dist}
109 Group: System Environment/Daemons
110 Source0: quagga-1.1.0-dev.tar.gz
112 URL: http://www.quagga.net
114 Requires(pre): /sbin/install-info
115 Requires(preun): /sbin/install-info
116 Requires(post): /sbin/install-info
117 BuildRequires: texi2html texinfo autoconf patch libcap-devel groff
119 BuildRequires: net-snmp-devel
123 BuildRequires: readline readline-devel ncurses ncurses-devel
127 BuildRequires: pam-devel
130 %if "%{initsystem}" == "systemd"
131 BuildRequires: systemd
132 Requires(post): systemd
133 Requires(preun): systemd
134 Requires(postun): systemd
136 # Initscripts > 5.60 is required for IPv6 support
137 Requires(pre): initscripts >= 5.60
139 Provides: routingdaemon = %{version}-%{release}
140 BuildRoot: %{_tmppath}/%{name}-%{version}-root
141 Obsoletes: bird gated mrt zebra quagga-sysvinit
144 Quagga is a free software that manages TCP/IP based routing
145 protocol. It takes multi-server and multi-thread approach to resolve
146 the current complexity of the Internet.
148 Quagga supports BGP4, OSPFv2, OSPFv3, ISIS, RIP, RIPng and PIM.
150 Quagga is intended to be used as a Route Server and a Route Reflector. It is
151 not a toolkit, it provides full routing power under a new architecture.
152 Quagga by design has a process for each protocol.
154 Quagga is a fork of GNU Zebra.
157 Summary: contrib tools for quagga
158 Group: System Environment/Daemons
161 Contributed/3rd party tools which may be of use with quagga.
164 Summary: Header and object files for quagga development
165 Group: System Environment/Daemons
166 Requires: %{name} = %{version}-%{release}
169 The quagga-devel package contains the header and object files neccessary for
170 developing OSPF-API and quagga applications.
173 %setup -q -n quagga-%{quaggaversion}
177 # For standard gcc verbosity, uncomment these lines:
178 #CFLAGS="%{optflags} -Wall -Wsign-compare -Wpointer-arith"
179 #CFLAGS="${CFLAGS} -Wbad-function-cast -Wwrite-strings"
181 # For ultra gcc verbosity, uncomment these lines also:
182 #CFLAGS="${CFLAGS} -W -Wcast-qual -Wstrict-prototypes"
183 #CFLAGS="${CFLAGS} -Wmissing-declarations -Wmissing-noreturn"
184 #CFLAGS="${CFLAGS} -Wmissing-format-attribute -Wunreachable-code"
185 #CFLAGS="${CFLAGS} -Wpacked -Wpadded"
188 --sysconfdir=%{_sysconfdir} \
189 --libdir=%{_libdir} \
190 --libexecdir=%{_libexecdir} \
191 --localstatedir=%{_localstatedir} \
199 %if %{with_multipath}
200 --enable-multipath=%{with_multipath} \
202 %if %{with_tcp_zebra}
208 %if %{with_ospfclient}
209 --enable-ospfclient=yes \
211 --enable-ospfclient=no\
214 --enable-ospfapi=yes \
216 --enable-ospfapi=no \
236 %if 0%{?quagga_user:1}
237 --enable-user=%quagga_user \
238 --enable-group=%quagga_user \
241 --enable-vty-group=%vty_group \
248 %if %{with_watchquagga}
249 --enable-watchquagga \
251 --disable-watchquagga \
253 --enable-gcc-rdynamic \
257 make %{?_smp_mflags} MAKEINFO="makeinfo --no-split"
260 %if %{texi2htmlversion} < 5
261 texi2html --number-sections quagga.texi
263 texi2html --number-footnotes --number-sections quagga.texi
268 mkdir -p %{buildroot}/etc/{quagga,sysconfig,logrotate.d,pam.d} \
269 %{buildroot}/var/log/quagga %{buildroot}%{_infodir}
270 make DESTDIR=%{buildroot} INSTALL="install -p" CP="cp -p" install
271 install %{SOURCE1} %{buildroot}/etc/quagga/bgpd.conf
273 # Remove this file, as it is uninstalled and causes errors when building on RH9
274 rm -rf %{buildroot}/usr/share/info/dir
276 # install /etc sources
277 %if "%{initsystem}" == "systemd"
278 mkdir -p %{buildroot}%{_unitdir}
279 for daemon in %{all_daemons} ; do
280 if [ x"${daemon}" != x"" ] ; then
281 install %{zeb_rh_src}/${daemon}.service \
282 %{buildroot}%{_unitdir}/${daemon}.service
286 mkdir -p %{buildroot}/etc/rc.d/init.d
287 for daemon in %{all_daemons} ; do
288 if [ x"${daemon}" != x"" ] ; then
289 install %{zeb_rh_src}/${daemon}.init \
290 %{buildroot}/etc/rc.d/init.d/${daemon}
295 install -m644 %{zeb_rh_src}/quagga.pam \
296 %{buildroot}/etc/pam.d/quagga
297 install -m644 %{zeb_rh_src}/quagga.logrotate \
298 %{buildroot}/etc/logrotate.d/quagga
299 install -m644 %{zeb_rh_src}/quagga.sysconfig \
300 %{buildroot}/etc/sysconfig/quagga
301 install -d -m750 %{buildroot}/var/run/quagga
306 if getent group %vty_group > /dev/null ; then : ; else \
307 /usr/sbin/groupadd -r -g %vty_gid %vty_group > /dev/null || : ; fi
310 # add quagga user and group
311 %if 0%{?quagga_user:1}
312 # Ensure that quagga_gid gets correctly allocated
313 if getent group %quagga_user >/dev/null; then : ; else \
314 /usr/sbin/groupadd -g %quagga_gid %quagga_user > /dev/null || : ; \
316 if getent passwd %quagga_user >/dev/null ; then : ; else \
317 /usr/sbin/useradd -u %quagga_uid -g %quagga_gid \
318 -M -r -s /sbin/nologin -c "Quagga routing suite" \
319 -d %_localstatedir %quagga_user 2> /dev/null || : ; \
324 # zebra_spec_add_service <service name> <port/proto> <comment>
325 # e.g. zebra_spec_add_service zebrasrv 2600/tcp "zebra service"
327 zebra_spec_add_service ()
329 # Add port /etc/services entry if it isn't already there
330 if [ -f /etc/services ] && \
331 ! %__sed -e 's/#.*$//' /etc/services | %__grep -wq $1 ; then
332 echo "$1 $2 # $3" >> /etc/services
336 zebra_spec_add_service zebrasrv 2600/tcp "zebra service"
337 zebra_spec_add_service zebra 2601/tcp "zebra vty"
338 zebra_spec_add_service ripd 2602/tcp "RIPd vty"
339 zebra_spec_add_service ripngd 2603/tcp "RIPngd vty"
340 zebra_spec_add_service ospfd 2604/tcp "OSPFd vty"
341 zebra_spec_add_service bgpd 2605/tcp "BGPd vty"
342 zebra_spec_add_service ospf6d 2606/tcp "OSPF6d vty"
344 zebra_spec_add_service ospfapi 2607/tcp "OSPF-API"
347 zebra_spec_add_service isisd 2608/tcp "ISISd vty"
350 zebra_spec_add_service pimd 2611/tcp "PIMd vty"
353 %if "%{initsystem}" == "systemd"
354 for daemon in %all_daemons ; do
355 %systemd_post ${daemon}.service
358 for daemon in %all_daemons ; do
359 /sbin/chkconfig --add ${daemon}
363 /sbin/install-info %{_infodir}/quagga.info.gz %{_infodir}/dir
365 # Create dummy files if they don't exist so basic functions can be used.
366 if [ ! -e %{_sysconfdir}/zebra.conf ]; then
367 echo "hostname `hostname`" > %{_sysconfdir}/zebra.conf
368 %if 0%{?quagga_user:1}
369 chown %quagga_user:%quagga_user %{_sysconfdir}/zebra.conf*
371 chmod 640 %{_sysconfdir}/zebra.conf
373 for daemon in %{all_daemons} ; do
374 if [ ! -e %{_sysconfdir}/${daemon}.conf ]; then
375 touch %{_sysconfdir}/${daemon}.conf
376 %if 0%{?quagga_user:1}
377 chown %quagga_user:%quagga_user %{_sysconfdir}/${daemon}.conf*
381 %if %{with_watchquagga}
382 # No config for watchquagga - this is part of /etc/sysconfig/quagga
383 rm -f %{_sysconfdir}/watchquagga.*
386 if [ ! -e %{_sysconfdir}/vtysh.conf ]; then
387 touch %{_sysconfdir}/vtysh.conf
388 chmod 640 %{_sysconfdir}/vtysh.conf
390 chown quagga:%{vty_group} %{_sysconfdir}/vtysh.conf*
395 if [ "$1" -ge 1 ]; then
396 # Find out which daemons need to be restarted.
397 for daemon in %all_daemons ; do
398 if [ -f /var/lock/subsys/${daemon} ]; then
399 eval restart_${daemon}=yes
401 eval restart_${daemon}=no
404 # Rename restart flags for daemons handled specially.
405 running_zebra="$restart_zebra"
407 %if %{with_watchquagga}
408 running_watchquagga="$restart_watchquagga"
409 restart_watchquagga=no
412 %if "%{initsystem}" == "systemd"
416 # No watchquagga for systemd version
418 # Stop all daemons other than zebra.
419 for daemon in %all_daemons ; do
420 eval restart=\$restart_${daemon}
421 [ "$restart" = yes ] && \
422 %systemd_postun ${daemon}.service
425 [ "$running_zebra" = yes ] && \
426 %systemd_postun_with_restart $daemon.service
427 # Start all daemons other than zebra.
428 for daemon in %all_daemons ; do
429 eval restart=\$restart_${daemon}
430 [ "$restart" = yes ] && \
431 %systemd_post ${daemon}.service
437 %if %{with_watchquagga}
438 # Stop watchquagga first.
439 [ "$running_watchquagga" = yes ] && \
440 /etc/rc.d/init.d/watchquagga stop >/dev/null 2>&1
442 # Stop all daemons other than zebra and watchquagga.
443 for daemon in %all_daemons ; do
444 eval restart=\$restart_${daemon}
445 [ "$restart" = yes ] && \
446 /etc/rc.d/init.d/${daemon} stop >/dev/null 2>&1
449 [ "$running_zebra" = yes ] && \
450 /etc/rc.d/init.d/zebra restart >/dev/null 2>&1
451 # Start all daemons other than zebra and watchquagga.
452 for daemon in %all_daemons ; do
453 eval restart=\$restart_${daemon}
454 [ "$restart" = yes ] && \
455 /etc/rc.d/init.d/${daemon} start >/dev/null 2>&1
457 %if %{with_watchquagga}
458 # Start watchquagga last.
459 # Avoid postun scriptlet error if watchquagga is not running.
460 [ "$running_watchquagga" = yes ] && \
461 /etc/rc.d/init.d/watchquagga start >/dev/null 2>&1 || :
467 %if "%{initsystem}" == "systemd"
471 if [ "$1" = "0" ]; then
472 for daemon in %all_daemons ; do
473 %systemd_preun ${daemon}.service
480 if [ "$1" = "0" ]; then
481 for daemon in %all_daemons ; do
482 /etc/rc.d/init.d/${daemon} stop >/dev/null 2>&1
483 /sbin/chkconfig --del ${daemon}
487 /sbin/install-info --delete %{_infodir}/quagga.info.gz %{_infodir}/dir
490 %if !0%{?keep_build:1}
495 %defattr(-,root,root)
496 %doc */*.sample* AUTHORS COPYING
499 %doc ChangeLog INSTALL NEWS README REPORTING-BUGS SERVICES TODO
500 %if 0%{?quagga_user:1}
501 %dir %attr(751,%quagga_user,%quagga_user) %{_sysconfdir}
502 %dir %attr(750,%quagga_user,%quagga_user) /var/log/quagga
503 %dir %attr(751,%quagga_user,%quagga_user) /var/run/quagga
504 %attr(750,%quagga_user,%quagga_user) %{_sysconfdir}/bgpd.conf
506 %dir %attr(750,root,root) %{_sysconfdir}
507 %dir %attr(750,root,root) /var/log/quagga
508 %dir %attr(750,root,root) /var/run/quagga
511 %attr(750,%quagga_user,%vty_group) %{_sysconfdir}/vtysh.conf.sample
513 %{_infodir}/quagga.info.gz
519 %if %{with_watchquagga}
520 %{_sbindir}/watchquagga
531 %attr(755,root,root) %{_libdir}/lib*.so
532 %attr(755,root,root) %{_libdir}/lib*.so.*
537 %config /etc/quagga/[!v]*
538 %if "%{initsystem}" == "systemd"
539 %config %{_unitdir}/*.service
541 %config /etc/rc.d/init.d/zebra
542 %if %{with_watchquagga}
543 %config /etc/rc.d/init.d/watchquagga
545 %config /etc/rc.d/init.d/ripd
546 %config /etc/rc.d/init.d/ospfd
547 %config /etc/rc.d/init.d/bgpd
548 %config /etc/rc.d/init.d/ripngd
549 %config /etc/rc.d/init.d/ospf6d
551 %config /etc/rc.d/init.d/isisd
554 %config /etc/rc.d/init.d/pimd
557 %config(noreplace) /etc/sysconfig/quagga
558 %config(noreplace) /etc/pam.d/quagga
559 %config(noreplace) %attr(640,root,root) /etc/logrotate.d/*
562 %defattr(-,root,root)
566 %defattr(-,root,root)
567 %if %{with_ospfclient}
568 %{_sbindir}/ospfclient
572 %dir %attr(755,root,root) %{_includedir}/%{name}
573 %{_includedir}/%name/*.h
574 %dir %attr(755,root,root) %{_includedir}/%{name}/ospfd
575 %{_includedir}/%name/ospfd/*.h
577 %dir %attr(755,root,root) %{_includedir}/%{name}/ospfapi
578 %{_includedir}/%name/ospfapi/*.h
582 * Thu Feb 11 2016 Paul Jakma <paul@jakma.org> - %{version}
583 - remove with_ipv6 conditionals, always build v6
584 - Fix UTF-8 char in spec changelog
585 - remove quagga.pam.stack, long deprecated.
587 * Thu Oct 22 2015 Martin Winter <mwinter@opensourcerouting.org>
588 - Cleanup configure: remove --enable-ipv6 (default now), --enable-nssa,
590 - Remove support for old fedora 4/5
591 - Fix for package nameing
592 - Fix Weekdays of previous changelogs (bogus dates)
593 - Add conditional logic to only build tex footnotes with supported texi2html
594 - Added pimd to files section and fix double listing of /var/lib*/quagga
595 - Numerous fixes to unify upstart/systemd startup into same spec file
596 - Only allow use of watchquagga for non-systemd systems. no need with systemd
598 * Fri Sep 4 2015 Paul Jakma <paul@jakma.org>
600 - add a default define for with_pimd
602 * Mon Sep 12 2005 Paul Jakma <paul@dishone.st>
603 - Steal some changes from Fedora spec file:
604 - Add with_rtadv variable
605 - Test for groups/users with getent before group/user adding
606 - Readline need not be an explicit prerequisite
607 - install-info delete should be postun, not preun
609 * Wed Jan 12 2005 Andrew J. Schorr <ajschorr@alumni.princeton.edu>
610 - on package upgrade, implement careful, phased restart logic
611 - use gcc -rdynamic flag when linking for better backtraces
613 * Wed Dec 22 2004 Andrew J. Schorr <ajschorr@alumni.princeton.edu>
614 - daemonv6_list should contain only IPv6 daemons
616 * Wed Dec 22 2004 Andrew J. Schorr <ajschorr@alumni.princeton.edu>
618 - on upgrade, all daemons should be condrestart'ed
619 - on removal, all daemons should be stopped
621 * Mon Nov 08 2004 Paul Jakma <paul@dishone.st>
622 - Use makeinfo --html to generate quagga.html
624 * Sun Nov 07 2004 Paul Jakma <paul@dishone.st>
625 - Fix with_ipv6 set to 0 build
627 * Sat Oct 23 2004 Paul Jakma <paul@dishone.st>
630 * Sat Oct 23 2004 Andrew J. Schorr <aschorr@telemetry-investments.com>
631 - Make directories be owned by the packages concerned
632 - Update logrotate scripts to use correct path to killall and use pid files
634 * Fri Oct 08 2004 Paul Jakma <paul@dishone.st>
637 * Wed Sep 15 2004 Paul Jakma <paul@dishone.st>
638 - build snmp support by default
640 - build with shared libs
641 - devel subpackage for archives and headers
643 * Thu Jan 08 2004 Paul Jakma <paul@dishone.st>
644 - updated sysconfig files to specify local dir
645 - added ospf_dump.c crash quick fix patch
646 - added ospfd persistent interface configuration patch
648 * Tue Dec 30 2003 Paul Jakma <paul@dishone.st>
650 - integrate RH sysconfig patch to specify daemon options (RH)
651 - default to have vty listen only to 127.1 (RH)
652 - add user with fixed UID/GID (RH)
653 - create user with shell /sbin/nologin rather than /bin/false (RH)
654 - stop daemons on uninstall (RH)
655 - delete info file on preun, not postun to avoid deletion on upgrade. (RH)
657 - cleanup tasks carried out for every daemon
659 * Sun Nov 2 2003 Paul Jakma <paul@dishone.st>
660 - Fix -devel package to include all files
663 * Tue Aug 12 2003 Paul Jakma <paul@dishone.st>
665 - Sync to Quagga release 0.96
667 * Thu Mar 20 2003 Paul Jakma <paul@dishone.st>
668 - zebra privileges support
670 * Tue Mar 18 2003 Paul Jakma <paul@dishone.st>
671 - Fix mem leak in 'show thread cpu'
672 - Ralph Keller's OSPF-API
673 - Amir: Fix configure.ac for net-snmp
675 * Sat Mar 1 2003 Paul Jakma <paul@dishone.st>
676 - ospfd IOS prefix to interface matching for 'network' statement
677 - temporary fix for PtP and IPv6
678 - sync to zebra.org CVS
680 * Mon Jan 20 2003 Paul Jakma <paul@dishone.st>
681 - update to latest cvs
682 - Yon's "show thread cpu" patch - 17217
683 - walk up tree - 17218
684 - ospfd NSSA fixes - 16681
685 - ospfd nsm fixes - 16824
686 - ospfd OLSA fixes and new feature - 16823
687 - KAME and ifindex fixes - 16525
688 - spec file changes to allow redhat files to be in tree
690 * Sat Dec 28 2002 Alexander Hoogerhuis <alexh@ihatent.com>
691 - Added conditionals for building with(out) IPv6, vtysh, RIP, BGP
692 - Fixed up some build requirements (patch)
693 - Added conditional build requirements for vtysh / snmp
694 - Added conditional to files for _bindir depending on vtysh
696 * Mon Nov 11 2002 Paul Jakma <paulj@alphyra.ie>
697 - update to latest CVS
698 - add Greg Troxel's md5 buffer copy/dup fix
700 - add Frank's multicast flag fix
702 * Wed Oct 09 2002 Paul Jakma <paulj@alphyra.ie>
703 - update to latest CVS
704 - timestamped crypt_seqnum patch
707 * Mon Sep 30 2002 Paul Jakma <paulj@alphyra.ie>
708 - update to latest CVS
709 - add vtysh 'write-config (integrated|daemon)' patch
710 - always 'make rebuild' in vtysh/ to catch new commands
712 * Fri Sep 13 2002 Paul Jakma <paulj@alphyra.ie>
715 * Wed Sep 11 2002 Paul Jakma <paulj@alphyra.ie>
716 - update to latest CVS
717 - add "/sbin/ip route flush proto zebra" to zebra RH init on startup
719 * Sat Aug 24 2002 Paul Jakma <paulj@alphyra.ie>
720 - update to current CVS
721 - add OSPF point to multipoint patch
723 - add BGP hash optimisation patch
725 * Fri Jun 14 2002 Paul Jakma <paulj@alphyra.ie>
726 - update to 0.93-pre1 / CVS
727 - add link state detection support
728 - add generic PtP and RFC3021 support
731 * Thu Aug 09 2001 Elliot Lee <sopwith@redhat.com> 0.91a-6
734 * Wed Aug 1 2001 Trond Eivind Glomsrød <teg@redhat.com> 0.91a-5
735 - Use generic initscript strings instead of initscript specific
736 ( "Starting foo: " -> "Starting $prog:" )
738 * Fri Jul 27 2001 Elliot Lee <sopwith@redhat.com> 0.91a-4
739 - Bump the release when rebuilding into the dist.
741 * Tue Feb 6 2001 Tim Powers <timp@redhat.com>
742 - built for Powertools
744 * Sun Feb 4 2001 Pekka Savola <pekkas@netcore.fi>
745 - Hacked up from PLD Linux 0.90-1, Mandrake 0.90-1mdk and one from zebra.org.
747 - Very heavy modifications to init.d/*, .spec, pam, i18n, logrotate, etc.
748 - Should be quite Red Hat'isque now.