vFW: Remove unused pkt_type parameter from example cfg files
[samplevnf.git] / VNFs / vFW / config / VFW_HWLB_IPV6_MultiPortPair_4Thread.cfg
1 ; Copyright (c) 2017 Intel Corporation
2 ;
3 ; Licensed under the Apache License, Version 2.0 (the "License");
4 ; you may not use this file except in compliance with the License.
5 ; You may obtain a copy of the License at
6 ;
7 ;      http:#www.apache.org/licenses/LICENSE-2.0
8 ;
9 ; Unless required by applicable law or agreed to in writing, software
10 ; distributed under the License is distributed on an "AS IS" BASIS,
11 ; WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
12 ; See the License for the specific language governing permissions and
13 ; limitations under the License.
14
15 [PIPELINE0]
16 type = MASTER
17 core = 0
18 [PIPELINE1]
19 type =  ARPICMP
20 core = 1
21
22 pktq_in  = SWQ0 SWQ1 SWQ2 SWQ3
23 pktq_out = TXQ0.0 TXQ1.0 TXQ2.0 TXQ3.0
24 ; ARP route table entries (ip, mask, if_port, nh) hex values with no 0x
25 ; Link MAC addresses in order aa:bb:cc:dd:ee:ff separated by space
26 nd_route_tbl =  (fec0::6a05:caff:fe30:21b0,64,0,fec0::6a05:caff:fe30:21b0)
27 nd_route_tbl =  (2012::6a05:caff:fe30:2081,64,2,2012::6a05:caff:fe30:2081)
28 nd_route_tbl =  (fec1::6a05:caff:fe30:21b0,64,1,fec1::6a05:caff:fe30:21b0)
29 nd_route_tbl =  (2016::6a05:caff:fe30:2081,64,3,2016::6a05:caff:fe30:2081)
30 ; Hex values with no leading 0x, MACs in ascending port order starting @P0
31 ports_mac_list = 00:cb:10:64:14:00 00:ca:10:64:14:00 00:ad:10:28:14:00 00:ac:10:28:14:00
32 ;
33 ; egress (private interface) info
34 pktq_in_prv =  RXQ0.0 RXQ1.0
35 ;
36 ;for pub port <-> prv port mapping (prv, pub)
37 prv_to_pub_map = (0,2)(1,3)
38 prv_que_handler = (0,1)
39 [PIPELINE2]
40 type = VFW
41 core = 2
42 pktq_in  = RXQ0.0 RXQ1.0 RXQ2.0 RXQ3.0
43 pktq_out = TXQ0.1 TXQ1.1 TXQ2.1 TXQ3.1 SWQ0
44
45
46 ;n_rules = 10000
47
48 ;n_flows gets round up to power of 2
49 n_flows = 1000000
50 traffic_type = 6
51
52 ; tcp_time_wait controls timeout for closed connection, normally 120
53 tcp_time_wait = 10
54 tcp_be_liberal = 0
55 ;udp_unreplied and udp_replied controls udp "connection" timeouts, normally 30/180
56 ;udp_unreplied = 20
57 ;udp_replied = 20
58 [PIPELINE3]
59 type = VFW
60 core = 3
61 pktq_in  = RXQ0.1 RXQ1.1 RXQ2.1 RXQ3.1
62 pktq_out = TXQ0.2 TXQ1.2 TXQ2.2 TXQ3.2 SWQ1
63
64
65 ;n_rules = 10000
66
67 ;n_flows gets round up to power of 2
68 n_flows = 1000000
69 traffic_type = 6
70
71 ; tcp_time_wait controls timeout for closed connection, normally 120
72 tcp_time_wait = 10
73 tcp_be_liberal = 0
74 ;udp_unreplied and udp_replied controls udp "connection" timeouts, normally 30/180
75 ;udp_unreplied = 20
76 ;udp_replied = 20
77 [PIPELINE4]
78 type = VFW
79 core = 4
80 pktq_in  = RXQ0.2 RXQ1.2 RXQ2.2 RXQ3.2
81 pktq_out = TXQ0.3 TXQ1.3 TXQ2.3 TXQ3.3 SWQ2
82
83
84 ;n_rules = 10000
85
86 ;n_flows gets round up to power of 2
87 n_flows = 1000000
88 traffic_type = 6
89
90 ; tcp_time_wait controls timeout for closed connection, normally 120
91 tcp_time_wait = 10
92 tcp_be_liberal = 0
93 ;udp_unreplied and udp_replied controls udp "connection" timeouts, normally 30/180
94 ;udp_unreplied = 20
95 ;udp_replied = 20
96 [PIPELINE5]
97 type = VFW
98 core = 5
99 pktq_in  = RXQ0.3 RXQ1.3 RXQ2.3 RXQ3.3
100 pktq_out = TXQ0.4 TXQ1.4 TXQ2.4 TXQ3.4 SWQ3
101
102
103 ;n_rules = 10000
104
105 ;n_flows gets round up to power of 2
106 n_flows = 1000000
107 traffic_type = 6
108
109 ; tcp_time_wait controls timeout for closed connection, normally 120
110 tcp_time_wait = 10
111 tcp_be_liberal = 0
112 ;udp_unreplied and udp_replied controls udp "connection" timeouts, normally 30/180
113 ;udp_unreplied = 20
114 ;udp_replied = 20
115